Leather pattern guides
How leather patterns are sized, stitched and folded, and how to print and check one before you cut.
How to print a leather pattern at actual size
Open the print window, choose Actual size or a scale of 100 %, and turn off Fit to page. Print page 1 and measure its 50 mm test square with a steel ruler before you cut.
How much leather does a buckle fold take?
How much length a fold around a buckle bar or spring bar uses, with a calculator for your leather and bars and tables in mm and inches.
How to make a leather pattern from measurements
A leather pattern in 7 steps: measure the object, add 4 mm for the stitch line, give folds their length, place holes once, print at 100 %.
How to make a leather watch strap: the pattern, piece by piece
How to make a leather watch strap from the lug width: 22 mm strap, 20 mm buckle, long side cut 132.6 mm, folds 5.9 mm and 4.3 mm. Pieces and build order.
How to make a leather card holder: pockets sized to the card
How to make a leather card holder sized to the card: 105 mm wide layers for an 85.6 mm card, 4 mm to the stitch line, 6 styles, build order.
Leather wallet pattern: how a bifold is sized from the card
A bifold leather wallet pattern from a 86 mm card: 96 mm panels, a 5 mm spine for 1.5 mm leather, shell 197 mm wide. Pieces, sizes and the spine rule.
Leather stitching hole spacing: stitch spacing, distance from the edge and hole size
Hand-stitching numbers for leather: 2.7 mm spacing and 3 mm from the edge on watch straps, 5 mm and 4 mm on our card holder, iron spacings in mm and SPI.
Leather thickness: oz to mm chart, and which thickness each pattern uses
Leather weight to thickness: 1 oz = 0.40 mm, 3 oz = 1.19 mm, 5 oz = 1.98 mm. Chart to 12 oz, how to measure, and which thickness each of our patterns uses.
Watch strap length by wrist size: how long the two pieces should be
Watch strap lengths from XS to XL: the default is 115 mm long and 75 mm short, measured from the spring bar. How to measure your wrist and pick a size.
Watch strap keeper size: how long and wide to cut the loops
Keeper (loop) sizes for a leather watch strap: 6 mm and 5 mm wide, cut 60.9 mm and 63.9 mm long for a 22 mm strap in 1.2 mm leather. A table by lug width.
Laser cut leather patterns: what the SVG and DXF files hold, and how to prepare them
Laser-cut leather patterns: true-scale SVG and DXF in mm, which lines to keep (cuts and stitch holes), the 0.1–0.2 mm beam width, why folds stay unscored.
Leather pattern PDF: 8 things to check before you print and cut
Before cutting leather from any pattern PDF, free or paid, run 8 checks: paper size, 50 mm test square, thickness, holes on every layer, fold length.
Leather pattern software: hand drafting, vector apps, CAD and parametric generators
4 ways to make leather patterns: paper and ruler, a vector app, CAD, or a parametric generator that redraws the pattern from your sizes. Pros and limits.
