How to print a leather pattern at actual size
Open the print window, choose Actual size or a scale of 100 %, and turn off Fit to page. Print page 1 and measure its 50 mm test square with a steel ruler before you cut.
Where do you open the PDF?
In Adobe Acrobat Reader
- Open the PDF and press Print (Ctrl+P, or ⌘P on a Mac).
- Under Page Sizing & Handling, choose Size, then Actual size.
- Print page 1 and measure the 50 mm square.
In macOS Preview
- Choose File, then Print. If you see Show Details, click it.
- Set Scale to 100 %, not Scale to Fit.
- Print page 1 and measure the 50 mm square.
In Google Chrome
- Open the PDF in Chrome and press Print (Ctrl+P, or ⌘P on a Mac).
- Open More settings. Set Scale to Actual size or Default, or choose Custom and type 100. Not Fit to printable area or Fit to paper.
- Print page 1 and measure the 50 mm square.
In Microsoft Edge
- Open the PDF in Edge and press Print (Ctrl+P, or ⌘P on a Mac).
- Open More settings. Set Scale to Actual size.
- Print page 1 and measure the 50 mm square.
Apps are named only to help you find the setting. Adobe Acrobat Reader is a trademark of Adobe Inc.; Mac and macOS are trademarks of Apple Inc.; Google Chrome is a trademark of Google LLC; Microsoft Edge is a trademark of the Microsoft group of companies. Leather Pattern House is not affiliated with or endorsed by Adobe, Apple, Google or Microsoft.
Print at actual size in 4 steps
Load the paper you picked
Use the paper you chose in Download: A4 or Letter. Each page of the PDF is made at that exact size.
Turn off Fit to page
In the print window, choose Actual size or a scale of 100 %. The tabs above show where.
Print page 1 first
Page 1 is the Start here page, with a 50 mm test square and a 2 in square, both marked CALIBRATION. Every pattern page repeats the 50 mm square and has a 100 mm ruler along the bottom. One page is enough to check your printer.
Measure the 50 mm square
Lay a steel ruler along both sides of the 50 mm square. Measure from the outer edge of one line to the outer edge of the other. Each side must read 49.8 to 50.2 mm. About 47 to 48 mm usually means Fit to page is still on. With an inch-only ruler, measure the 2 in square on page 1 instead. Each side must end exactly on the 2 in mark; 1 15/16 in or less means Fit to page is still on. Fix the setting and print page 1 again before you cut.
Common mistakes
- Printing with Fit to page or Shrink oversized pages turned on. Both can change the size.
- Loading Letter paper for an A4 file, or A4 for a Letter file. The printer may shrink the page or cut off an edge.
- Measuring with a soft tape. Use a steel ruler.
- Measuring only one side. A printer can scale width and height differently, so check both.
- Rounding on an inch-only ruler. 50 mm is 1 31/32 in, just under 2 in. Measure the 2 in square on page 1 instead: it must end exactly on the 2 in mark.
- Cutting leather before the 50 mm square reads 49.8 to 50.2 mm, or before the 2 in square ends exactly on the 2 in mark.
